• Lightwave T20 Trail
  • Lightwave T20 Trail
  • Lightwave T20 Trail
  • Lightwave T20 Trail

Lightwave T20 Trail


Durable two person tunnel tent


Lightwave’s Trail tunnel tent range combines the design qualities of the top-of-the-range hyper models with the fabric and pole specifications of the established and highly regarded trek range. The result is outstanding all-round performance at a reasonable price.

The trail tents offer the same multi-pitch options as the hyper range. This means they can be erected flysheet-first, inner-tent first, or integrally.

The fabrics used in the trail tents strike an excellent balance of strength and weight, with a slight bias towards strength in order to cope with robust handling and to maintain long-term durability. The poles are not the lightest available but possess tremendous resilience when it comes to absorbing stress. Each trail tent comes with two types of peg to cover different ground conditions – from hard-packed earth to loose sandy soil.



60 g/m2, 40d nylon ripstop, silicone-coated both sides, 5000 mm hydrostatic head

The flysheet on the Trail tents is made from nylon with a yarn thickness of 40 denier. Lightwave has been using this fabric in its robust trek range for the past ten years: there is no better balance between strength (high), weight (low) and price (medium). Like all Lightwave tent flysheets it is silicone-coated on both sides (for water-resistance). Silicone coatings maintain the inherent strength of the fabric, whereas the conventional polyurethane (PU) coatings typically used on most tents reduce the tear strength by up to 70%.


150 g/m2, 210d nylon oxford, 3-pass PU-coated
5000 mm hydrostatic head, factory-taped seams
The Trail groundsheet is made from a truly heavyweight 200-denier nylon, which is twice the denier (yarn thickness) of most groundsheet fabrics and makes it exceptionally tough. Equally important, however, is the quality of the application of the polyurethane coating for durable water-resistance (DWR).

Inner canopy 

43 g/m2, 40d nylon ripstop, DWR treated


Yunan 9.00mm 7001-T6 aluminium alloy

Trail tents use the workhorse 7001-T6 aluminium alloy that is the standard pole-set material for the vast majority of lightweight tents. The reason is simple – 7001-T6 aluminium alloy is very resilient, extremely well-proven and carries a very small weight penalty over marginally lighter, stiffer alloys.


Lightning pegs, 11 g each, square section
Wavelight pegs, 12 g each, corkscrew design

Pegs are very important – without them, no tent could withstand anything more than the slightest breeze. Lightwave supplies two different pegs with the trail tents to ensure they can be secured in all ground conditions, a critical factor for tunnel tents as they are completely dependant upon solid anchors at front and rear.


3.00 mm nylon, 3 m length, Linelok adjusters

Trail guylines are made of standard 3.00 mm nylon cord with a reflective fleck woven into it. Their Linelok adjusters mean they are easy to tension, even with gloves on.

  • Persons - 2
  • Weight - 2.53kg
  • Packed Size - 45 x 18cm
  • Colours - Forest Green


Equipment Type 2 Person Tunnel Tent
Brand Lightwave
Weight 2.53kg


Based on 0 reviews